Eagletac TX30C2

Description

The Eagletac TX30C2 torch has a maximum output of 1603 lumens from the Cree XHP35 HD E4 LED or approximately 7% less from the Cree Nichia 219C LED. The flashlight is powered by either 1 x 18650 Li-ion batteries or 2 x CR123 single use cells. Please note, the Kit version comes with a body tube and can take 2 x 18650 batteries, however it cannot take 4 x CR123 single use cells.

The handheld flashlight has five brightness levels plus a Beacon, Strobe and SOS mode which are operated using the dual switch design. Ranging from 14 to 1603 lumens (please note, the Nichia version output is approximately 7% less), the TX30C2 offers a lighting source suitable for a variety of applications.

The torch has a battery report system to ensure you are aware of the battery status and when it is time to recharge or replace the battery. One flash indicates the battery capacity is below 20%, two flashes means between 20 and 50%, three flashes means between 50 and 80% and four flashes indicates above 80% charged.

The TX30C2 is available with a either an XHP35 HD E4 LED in Base or Kit version. The base version has a smooth aluminium black bezel, where as the kit version features a crenulated, stainless steel bezel. Both models comes with spare o-rings and a lanyard. The kit version comes with an add-on diffuser and a nylon holster.

Brightness Levels:
XHP35 HD E4 LED
Turbo: 1603 lumens – 1.3 hrs runtime (Please note the output steps down from 1603 to 1111 lumens to avoid overheating)
High: 711 lumens – 2.7 hrs runtime
Mid: 296 lumens – 7.2 hrs runtime
Low: 105 lumens – 22 hrs runtime
Ultralow: 14 lumens – 200 hrs runtime

Maximum beam distance 291 meters and waterproof to IPX-8.

Base Version Includes: spare o-rings, lanyard, smooth aluminium black bezel, 2 x single use CR123 batteries.
Kit Version Includes: spare o-rings, lanyard, crenulated stainless steel bezel, diffuser, nylon holster, body extender tube, 2 x CR123 single use batteries.